Is multipath supported in gPXE iSCSI boot in Windows?

[Sonny Li]

Have done some search, but don't get the suitable results. So ask here:

Situation:
iSCSI initiator machine has two NICs with separated IP address, Init_ipA and init_ipB
iSCSI Target machine also has two NICs with separated IP address, target_ipA and target_ipB

question:
Is it possible to set the following and how to setup them
Init_ipA gpxe iSCSI connect to target_ipA for iSCSI boot as primary path
Init_ipA gpxe iSCSI connect to target_ipA for iSCSI boot as secondary path

So if primary path is down, secondary path can take it over to continue for iSCSI boot. I have tried for Hardware NICs (like Intel PCI-E). they can support above situation, but not sure for gPXE iSCSI boot.

Thanks

Sonny